Fast and simultaneous Carbon Nitrogen analyses
The CN 802 is a robust and flexible combustion analyzer, that works following official reference methods for the determination of carbon and nitrogen in many industrial sectors such as agriculture, environmental, food & feed, and chemical.
The proprietary CNSoftTM software powers the CN 802 and produces unsupervised, simultaneous results in 5 minutes of:
- TC: Total Carbon
- TOC, TIC: Total Organic and Inorganic Carbon (after acidification)
- TN: Total Nitrogen
- C/N Ratio
The CN 802 is a safe analyzer that does not require aggressive chemicals or time-consuming analysis steps. Just prepare your sample and walk away!
Just set your next analysis and access a wealth of information from the sample!
CN 802 Working Process
The sample is purged with a carrier and drops down into the combustion reactor where it is converted into its elemental compounds at a high temperature (above 1000°C).
Water separation is performed in 2 steps. The combustion gases are carried to the first maintenance-free physical trap DriStepTM (WT1), strategically placed after combustion, trapping 99% of water. Secondly, a chemical trap (WT2) ensures complete removal of the remaining 1% of water.
The combination of high temperature and the exclusive VcopperTM reduces nitrogen dioxide to molecular nitrogen inside the reduction furnace.
The VELP HighSensIR detector enables analysis of an extremely wide carbon concentration range, from just a few ppm up to 150 mg of absolute carbon, from micro to macro applications.
Then, Auto-regenerative CO2 absorbers trap carbon dioxide, allowing the exclusive TCD (Thermal Conductivity Detector) to detect the Nitrogen content.
Fat extraction for fiber determination
The COEX is used to perform preliminary defatting of the sample prior to fiber determination with FIWE and FIWE Advance. The COEX guarantee maximum reliability and is a mandatory step for all feed sample with high fat content.
The efficient pump aspirates and removes the fatty component that will be collected in a dedicated waste tank/bottle.
The COEX is easy to use and convenient, all the reagents can be added through the same channel.
Avoid sample loss and transfers
The COEX ensures rapid fat extraction directly into the same glass crucibles used by the FIWE and FIWE Advance whenever the fat content of feed sample is high and need to be reduce to less than 1%.
The crucible containing the defatted sample is transferred directly to the FIWE and FIWE Advance analyzer eliminating possible errors due to sample transfer.
Rapid and efficient filtration
CSF6 is optimal for efficient filtration, after the samples have been processed by the Enzymatic Digester GDE.
This VELP combination allows the analysis to be carried out in accordance with the official AOAC (Determination of Total Dietary Fibre) method with a drastic reduction in the time required compared to the manual procedure.
CFS6 filtration unit is able to perform single or multiple samples at the same time, up to a maximum of 6 samples at the same time, in less than 20 minutes, even at full load.
Reliable filtration unit
The high efficient pump allows to speed-up the filtration step and the final washing.
Compressed air can be also injected from the bottom to remove any sample accumulated in the filter of the crucible, which affects the quality of filtration.
The CTX Texture Analyzer is AMETEK Brookfield's new advanced model for the compression/tension testing of materials. It brings an exciting new dimension of quick, efficient testing to busy labs that need to improve productivity while maintaining quality.
The CTX usability features allow for easy setup to get you up and running quickly. Whether you are testing the consistency of pills and tablets, the peel ability of a yogurt lid, or the tensile strength of lipstick, our new CTX will meet your ever-growing testing needs.
The addition of TexturePro Software makes the CTX ideal for R&D labs performing material evaluation/characterization tests. It is also great in QC applications where data can be sent or saved in multiple formats.
FEATURES & BENEFITS
- Provides a "real life" insight into physical properties.
- Interchangeable load cells for optimal flexibility (eight choices ranging from 100g to 100kg).
- Easy-to-read display and easy-to-use intuitive controls.
- Extended boom travels up to 280mm for longer reach testing.
- High Precision: 500 Hz data output rate captures the precise moment there is a change to your sample.
- The choice of three adjustable base tables allows for the versatility of sample testing.
- 21CFR compliant with optional TexturePro Software.
OPTIONAL ACCESSORIES
The CTX has a wide variety of probes, fixtures for testing broad categories of packaging materials, foods of all types, cosmetics, pharmaceuticals, and mechanical devices. AMETEK Brookfield can also custom design a fixture and probe for most applications.
- TexturePro Software
- Temperature Probe
- Bubble Level
- Calibration Weight Set
- Gelatin Bath System for gel conditioning Bloom Jar - industry approved
APPLICABILITY
CTX has a variety of probes and fixtures for testing various packaging materials, food, cosmetics, pharmaceuticals and mechanical equipment; it can also customize fixtures and probes for most applications.
Having difficulties determining what instrument is best for you? Contact Analis Benelux local experts for guidance.
Esco’s Cytoculture® Cytotoxic Safety Cabinet is the premium solution for cytotoxic/antineoplastic drug processing; providing the highest level of patient, pharmacist, and environmental protection. This revolutionary product builds on Esco’s experience of more than 20 years as a global leader in biological safety containment technology.
The unique demands of handling and preparing cytotoxic drugs for use in chemotherapy require a specialized cabinet. With this in mind, Esco has developed a highly specialized cabinet designed especially for the preparation of these potentially dangerous drugs.
Key Benefits:
Safe filter changing
Safer dual exhaust filters
HEPA certified to EN 12469
The DK 18/26 Series Kjeldahl digestion unit with aluminium heating block ensures high thermal homogeneity heating up to 450 °C. The temperature of the block is constantly controlled by a microprocessor and is extremely stable, homogeneous and precise: ±0.5°C at all selectable temperatures.
The DK 18/26 Series guarantees accuracy and repeatability. The DK 18/26 performs batch digestion of up to 18 samples with 100 ml test tubes - Ø 26 mm, reducing the energy consumption (-13% compared to the previous series). Low energy consumption provides lower costs of analysis and limits CO2 release.
For applications where the digestion process produces fumes, acid gases or corrosive substances, the below specific accessory is strongly recommended:
- KS 1000 Scrubber neutralizes all the fumes
The DK 20 Series Kjeldahl digestion unit with aluminium heating block ensures high thermal homogeneity heating up to 450 °C. The temperature of the block is constantly controlled by a microprocessor and is extremely stable, homogeneous and precise: ±0.5°C at all selectable temperatures.
The DK 20 Series guarantees accuracy and repeatability. The DK 20 series perform batch digestion of up to 20 samples with 250 ml test tubes - Ø 42 m, reducing the energy consumption (-13% compared to the previous series). Low energy consumption provides lower costs of analysis and limits CO2 release.
For applications where the digestion process produces fumes, acid gases or corrosive substances, the below specific accessory is strongly recommended:
- KS 1000 Scrubber neutralizes all the fumes
The DK 42/26 Series digestion unit with aluminum heating block ensures high thermal homogeneity heating up to 450 °C. The temperature of the block is constantly controlled by a microprocessor and is extremely stable, homogeneous and precise: ±0.5°C at all selectable temperatures. DK 42/26 allows digestions with 42 positions for 100 ml test tubes, Ø 26 mm.
The DK 42/26 Series guarantees accuracy and repeatability. The DK 42/26 performs batch digestion of up to 42 samples with 100 ml test tubes - Ø 26 mm, reducing the energy consumption (-13% compared to the previous series). Low energy consumption provides lower costs of analysis and limits CO2 release.
For applications where the digestion process produces fumes, acid gases or corrosive substances, the below specific accessory is strongly recommended:
- KS 1000 Scrubber neutralizes all the fumes
The DK 6 Series Kjeldahl digestion unit with aluminium heating block ensures high thermal homogeneity heating up to 450 °C. The temperature of the block is constantly controlled by a microprocessor and is extremely stable, homogeneous and precise: ±0.5°C at all selectable temperatures.
The DK 6 Series guarantees accuracy and repeatability. The DK 6 series perform batch digestion of up to 6 samples with 250 ml test tubes - Ø 42 m, reducing the energy consumption (-13% compared to the previous series). Low energy consumption provides lower costs of analysis and limits CO2 release.
For applications where the digestion process produces fumes, acid gases or corrosive substances, the below specific accessory is strongly recommended:
- KS 1000 Scrubber neutralizes all the fumes
The DK 6/48 Series Kjeldahl digestion unit with aluminium heating block ensures high thermal homogeneity heating up to 450 °C. The temperature of the block is constantly controlled by a microprocessor and is extremely stable, homogeneous and precise: ± 0.5°C at all selectable temperatures.
The DK 6/48 Series guarantees accuracy and repeatability. The DK 6/48 series perform batch digestion of up to 6 samples with 300 ml test tubes - Ø 48 mm, reducing the power consumption of 13% compared to the previous series. Low energy consumption permit to have low costs for every single analysis and limit CO2 release.
For applications where the digestion process produces fumes, acid gases or corrosive substances, the below specific accessory is strongly recommended:
- KS 1000 Scrubber neutralizes all the fumes
The DK 8 Series digestion unit with aluminium heating block ensures high thermal homogeneity heating up to 450 °C. The temperature of the block is constantly controlled by a microprocessor and is extremely stable, homogeneous and precise: ±0.5°C at all selectable temperatures.
The DK 8 Series guarantees accuracy and repeatability. The DK 8 performs batch digestion of up to 8 samples with 250 ml test tubes - Ø 42 m, reducing the energy consumption (-13% compared to the previous series). Low energy consumption provides lower costs of analysis and limits CO2 release.
For applications where the digestion process produces fumes, acid gases or corrosive substances, the below specific accessory is strongly recommended:
- KS 1000 Scrubber neutralizes all the fumes.
DKL digesters are fully automatic and immediately ready to use, as they consist of an aluminium heating block, a lift for automatic sample handling, suction hood, test tubes, test tube rack and drip tray. The DKL 12 automate digestion with12 positions for both 250 and 400 ml test tubes, Ø 42 mm.
The DKL series provides the operator with the ultimate technology that allows the laboratory technician to set up the analysis choosing from a library of 54 programs (30 pre-installed + 24 customizable), press START and walk away, boosting the lab productivity.
Ease of loading and unloading make the VELP DKL a pleasure to use when carrying out Kjeldahl analysis, and there is no need to handle the sample when the tubes are hot!
For applications where the digestion process produces fumes, acid gases or corrosive substances, the below specific accessory is strongly recommended:
- KS 1000 Scrubber neutralizes all the fumes