Het hart van elk Brookfield viscositeitsinstrument wordt gevormd door een zorgvuldig ontworpen veer die ontworpen is om de viscositeit van vloeistoffen en visco-elastische materialen met ongeëvenaarde nauwkeurigheid te meten.
Deze instrumenten werken volgens het principe van roterende viscositeitmeting, waarbij gebruik wordt gemaakt van het koppel dat nodig is om een spindel in een vloeistof in beweging te houden aan een vast toerental.
Hoe werkt een viscositeitsmeting?
Onderdompeling
Het Brookfield instrument dompelt een spindel of sonde onder in de vloeistof. De geometrie van de spindel en de snelheid van rotatie bepalen het bereik en nauwkeurigheid van de viscositeitsmeting.
Rotatie
De spindel wordt in beweging gebracht in de vloeistof aan een vaste snelheid. De viscositeit van het materiaal creëert weerstand tegen vloei, die gemeten wordt in termen van koppel.
Berekening
Nauwkeurige sensoren controleren continu het koppel en de rotatiesnelheid. Het instrument berekent vervolgens de viscositeitswaarde in real-time op basis van de gemeten weerstand.
Resultaat
De viscositeitsmeting wordt weergegeven op een gebruiksvriendelijke interface, computer of touch screen, waarop de gebruiker onmiddellijk inzicht krijgt in het viscositeitsgedrag van zijn stalen.
Kies Brookfield voor viscositeit
Brookfield is de referentie in viscositeitsmetingen. Of u nu werkt in onderzoek, productie of kwaliteitscontrole, Brookfield viscositeitsmeters stellen u in staat weloverwogen beslissingen te nemen, processen te stroomlijnen en de hoogste productkwaliteit te garanderen.
Neem vandaag nog contact met ons op voor meer informatie over hoe Brookfield viscositeitsmeters uw product- en kwaliteitsbeslissingen efficiënter en juister kunnen maken.
Voordelen van een Brookfield viscositeitsmeter
Precisie en nauwkeurigheid
Brookfield instrumenten staan bekend om hun precisie en nauwkeurigheid en leveren consistente resultaten waarop u kunt vertrouwen bij het nemen van beslissingen en kwaliteitscontrole.
Begrijpbare resultaten
Door real-time gegevens te leveren, stellen deze instrumenten u in staat om processen te optimaliseren, productiestilstand te verminderen en productverspilling te minimaliseren.
Naleving van regelgeving
In industrieën waar naleving van strenge kwaliteitsnormen noodzakelijk is, zorgen Brookfield viscositeitsmeters ervoor dat uw producten voldoen aan de voorschriften.
Verbeterde productkwaliteit
Consistentie is het keurmerk van kwaliteit. Met Brookfield kunt u vol vertrouwen producten produceren die aan de verwachtingen van de klant voldoen of deze zelfs overtreffen.
Gebruiksgemak
Brookfield instrumenten zijn ontworpen met de gebruiker in gedachten. Hun intuïtieve interfaces, touch screens en software maken ze toegankelijk voor zowel doorgewinterde professionals als nieuwkomers.
Uitgebreide ondersteuning
Als uw exclusieve Brookfield distributeur in België en Luxemburg Analis uitgebreide ondersteuning, inclusief installatie, training en doorlopende technische ondersteuning om ervoor te zorgen dat u het maximale uit uw Brookfield haalt.
DVPlus viscositeitsmeter
De DVPlus viscositeitsmeter is de nieuwste budget viscositeitsmeter van Brookfield met een geavanceerde gebruikersinterface en de beste functies in zijn klasse.
Geschikt voor alle toepassingen waar nauwkeurige, éénpunts-viscositeitsmetingen gewenst zijn op een stand-alone toestel
DVNext Reometer
De DVNext Reometer is een high-end toestel dat beschikt over geavanceerde functies voor het bepalen van vloeicurves, vloeispanning of voor complexe viscositeitsprofielen te bepalen.
Dit toestel is beschikbaar in een standaarduitvoering en in een compliant versie die voldoet aan alle 21 CFR part 11 vereisten.
DVNext cone/plate Reometer
De DVNext cone/plate reometer beschikt over een eenvoudig te verwisselen magnetische spindel en biedt een geavanceerde oplossing voor het routinematig bepalen van viscositeiten van vloeistoffen in kleine monstervolumes.
De cone- en plate geometrie kan een precieze shear rate aanleggen van 10 of 100s-1 die o.a. gewenst is bij methodes volgens de Ph. Eur.
DV2T touch screen
De DV2T beschikt over een 5-inch kleurenscherm om gebruikers te begeleiden bij het maken van tests en het verzamelen van gegevens voor snelle en eenvoudige viscositeitsmetingen en aftoetsen van QC-limieten.
Analoge DVT
De originele Brookfield Dial Reading viscositeitsmeter is de laboratoriumstandaard die wereldwijd wordt gebruikt. Handmatige omrekening van de resultaten is nodig om een viscositeitswaarde te verkrijgen.
CAP-2000 viscositeitsmeter
De CAP-2000 biedt een oplossing voor cone/plate metingen onder hoge shear rates en variërende temperaturen. Oorspronkelijk ontworpen voor de inkt-industrie, biedt de CAP-2000 vandaag een oplossing voor zowel R&D als QC voor verschillende toepassingen.
KU-3 viscositeitsmeter
De KU-3 viscositeitsmeter geeft Krebs-eenheden, gram-eenheden en centipoise weer voor verven, coatings en inkten in overeenstemming met ASTM D562.
Viscositeit in verschillende industrieën
Brookfield viscositeitsinstrumenten staan bekend om hun veelzijdigheid en zijn geschikt voor een breed scala aan industrieën en toepassingen. Van onderzoek en ontwikkeling tot kwaliteitscontrole en productieprocessen, deze instrumenten spelen een centrale rol. Hier zijn enkele belangrijke industrieën die profiteren van de oplossingen van Brookfield:
Voedingsindustrie
Brookfield viscosimeters helpen bij het handhaven van een consistente productkwaliteit in de voedingsmiddelen- en drankenindustrie en zorgen voor de perfecte textuur en het mondgevoel van producten zoals sauzen, dressings en meer.
Farmaceutica
In de farmaceutische industrie zijn nauwkeurige viscositeitsmetingen van cruciaal belang voor de formulering van geneesmiddelen, om de nauwkeurigheid van de dosering en de optimale prestaties van farmaceutische producten te garanderen.
Verven en coatings
Bereik superieure productconsistentie en kwaliteitscontrole in de verf- en coatingsindustrie en garandeer dat uw producten afgeleverd worden met een maximale houdbaarheid en verwerkbaarheid.
Petrochemie
Brookfield instrumenten zijn van vitaal belang voor het testen van de viscositeit van ruwe olie, smeermiddelen en diverse chemische formuleringen en zorgen voor veiligheid en naleving van industriële voorschriften.
Cosmetica
In cosmetica zijn textuur en smeerbaarheid en laagdikte essentieel. Brookfield viscosimeters helpen bij het creëren van lotions, crèmes, lakken en make-up producten met de perfecte consistentie.
Onderzoek en ontwikkeling
Onderzoekers in verschillende industrieën vertrouwen op Brookfield viscositeitsinstrumenten voor nauwkeurige gegevens om nieuwe producten en formuleringen te ontwikkelen.
Onze producten
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations are available upon request
Available viscosity values in General Purpose Silicone Fluids (at 25°C)
- 5 cps
- 10 cps
- 50 cps
- 100 cps
- 500 cps
- 1000 cps
- 5000 cps
- 12500 cps
- 30000 cps
- 60000 cps
- 100000 cps
Silicone viscosity Standard fluids are most commonly used to verify the calibration of Brookfield lab viscometers and rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying the calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids, which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations are available upon request
Available viscosity values in general-purpose Purpose Silicone Fluids (at 25°C)
- 5 cps
- 10 cps
- 50 cps
- 100 cps
- 500 cps
- 1000 cps
- 5000 cps
- 12500 cps
- 30000 cps
- 60000 cps
- 100000 cps
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Available viscosity values in General Purpose Silicone Fluids (at 25°C)
- 5 cps
- 10 cps
- 50 cps
- 100 cps
- 500 cps
- 1000 cps
- 5000 cps
- 12500 cps
- 30000 cps
- 60000 cps
- 100000 cps
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Available viscosity values in general-purpose Purpose Silicone Fluids (at 25°C)
- 5 cps
- 10 cps
- 50 cps
- 100 cps
- 500 cps
- 1000 cps
- 5000 cps
- 12500 cps
- 30000 cps
- 60000 cps
- 100000 cps
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Available viscosity values in General Purpose Silicone Fluids (at 25°C)
- 5 cps
- 10 cps
- 50 cps
- 100 cps
- 500 cps
- 1000 cps
- 5000 cps
- 12500 cps
- 30000 cps
- 60000 cps
- 100000 cps
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Available viscosity values in General Purpose Silicone Fluids (at 25°C)
- 5 cps
- 10 cps
- 50 cps
- 100 cps
- 500 cps
- 1000 cps
- 5000 cps
- 12500 cps
- 30000 cps
- 60000 cps
- 100000 cps
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are for Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Available viscosity values in General Purpose Silicone Fluids (at 25°C)
- 5 cps
- 10 cps
- 50 cps
- 100 cps
- 500 cps
- 1000 cps
- 5000 cps
- 12500 cps
- 30000 cps
- 60000 cps
- 100000 cps
Silicone viscosity Standard fluids are most commonly used to verify the calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying the calibration of your Brookfield Viscometer/Rheometer.
Silicone standards are for Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature-sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument.
All fluids are supplied in ½-liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Available viscosity values in General Purpose Silicone Fluids (at 25°C)
- 5 cps
- 10 cps
- 50 cps
- 100 cps
- 500 cps
- 1000 cps
- 5000 cps
- 12500 cps
- 30000 cps
- 60000 cps
- 100000 cps
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying the calibration of your Brookfield viscometer or rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Available viscosity values in General Purpose Silicone Fluids (at 25°C)
- 5 cps
- 10 cps
- 50 cps
- 100 cps
- 500 cps
- 1000 cps
- 5000 cps
- 12500 cps
- 30000 cps
- 60000 cps
- 100000 cps
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Available viscosity values in General Purpose Silicone Fluids (at 25°C)
- 5 cps
- 10 cps
- 50 cps
- 100 cps
- 500 cps
- 1000 cps
- 5000 cps
- 12500 cps
- 30000 cps
- 60000 cps
- 100000 cps
CAP Viscometer Oil Fluids are used for calibrating CAP series viscometers.
General purpose oil fluids are best suited for those instruments using Cone/Plate Viscometers/Rheometers.
FEATURES & BENEFITS
- Accuracy: +/-1% of viscosity value
- Appropriate for use at shear rates greater than 500 sec-1
- Recommended for use with cone/plate Viscometers at viscosities above 5,000 cP
- Brookfield oil viscosity standards are hydrocarbon based, either mineral oil or polybutenes. Note: Other oil fluids are available - call for details
- Brookfield Viscosity Standards are accurate to ±1% of the stated viscosity and are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
- The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument. All fluids are supplied in 1/2 liter (1 pint) containers complete with a certificate of calibration.
- CAP Oil Fluids are supplied in 150 mL (4 oz) containers