BROOKFIELD (AMETEK)

30000 cP VISCOSITY STANDARD (500ml)

Référence: AME-30000 CPS

Les fluides étalons de viscosité au silicone servent couramment à vérifier l'étalonnage des viscosimètres et rhéomètres Brookfield, et sont moins sensibles à la température que les huiles minérales.

Les fluides silicones polyvalents sont l'étalon le plus utilisé pour vérifier l'étalonnage de votre viscosimètre ou rhéomètre Brookfield.

Les étalons silicones sont des fluides newtoniens, précis à ±1 % de la valeur de viscosité.

Les fluides silicones offrent une excellente stabilité en température et sont moins sensibles à la température que les étalons à base d'huile.

Les étalons de viscosité Brookfield sont certifiés par des méthodes traçables au National Institute of Standards and Technology (NIST) des États-Unis.

Un ou deux fluides fournissent généralement assez de points de mesure pour vérifier l'étalonnage de votre instrument.

Tous les fluides sont livrés en contenants d'½ litre (1 pinte) avec un certificat d'étalonnage.

CARACTÉRISTIQUES ET AVANTAGES

Précision : ±1 % de la valeur de viscosité
Excellente stabilité en température
Recommandé pour les viscosimètres rotatifs Brookfield et la plupart des autres
Très économique
Valeurs de viscosité et étalonnages en température spéciaux sur demande

Demander plus d’information

Données Techniques

General Purpose Silicone Fluids
Brookfield Part #	Nominal Viscosity cP (mPa · s)	Temp °C
5 cps	5	25°C
10 cps	10	25°C
50 cps	50	25°C
100 cps	100	25°C
500 cps	500	25°C
1000 cps	1,000	25°C
5000 cps	5,000	25°C
12500 cps	12,500	25°C
30000 cps	30,000	25°C
60000 cps	60,000	25°C
100000 cps	100,000	25°C

Accessoires, consommables et produits connexes

BROOKFIELD (AMETEK)

100 cP VISCOSITY STANDARD (appx 900ml)

Reference : AME-100 CPS

Silicone viscosity Standard fluids are most commonly used to verify the calibration of Brookfield lab viscometers and rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying the calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids, which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.

Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.

FEATURES & BENEFITS

- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations are available upon request

BROOKFIELD (AMETEK)

1000 cP VISCOSITY STANDARD (appx 900ml)

Reference : AME-1000 CPS

BROOKFIELD (AMETEK)

500 cP VISCOSITY STANDARD (appx 900ml)

Reference : AME-500 CPS

Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying the calibration of your Brookfield viscometer or rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.

Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.

FEATURES & BENEFITS

Accuracy: ±1% of viscosity value
Excellent temperature stability
Recommended for use with Brookfield and most other rotational viscometers
Most economical
Special viscosity values and temperature calibrations available upon request

BROOKFIELD (AMETEK)

5000 cP VISCOSITY STANDARD (appx 900ml)

Reference : AME-5000 CPS

Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.

Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.

FEATURES & BENEFITS

Accuracy: ±1% of viscosity value
Excellent temperature stability
Recommended for use with Brookfield and most other rotational viscometers
Most economical
Special viscosity values and temperature calibrations available upon request