Bag contains 500 sample vials for use with the Vi-CELL BLU Analyzer. Minimum volume required in sample vial is 200µm. In FAST mode, a minimum volume of 170µm is required in the sample vial.
Note : This product replace previous reference BEC-C24843 Sample Vials (350 vials each bags)
Le tapis adhésif LABWIT est disponible en pièces individuelles (20 x 20 cm) pour adapter les plateaux existants.
Le même tapis adhésif peut être utilisé à plusieurs endroits. Il convient à toutes les surfaces métalliques et peut être appliqué sur des plateaux universels avec des trous pour tubes à essai
Ce tapis Labwit est facile à utiliser, rend votre plateforme plus polyvalente et vous permet d'ajuster sans effort la charge de votre agitateur.
Facile à installer et à nettoyer :
il suffit de retirer le tapis adhésif et de le plonger brièvement dans l'eau pour le remettre en état. Le matériau reprend alors sa forme d'origine et peut être réutilisé.
Thickwall Polypropylene Tubes
For use in Ultracentrifuge Rotors:
- TLA-120.2 (Part Numbers 362046, 357656)
- MLA-150 (Part Numbers 393489, 393490)
Les étalons de viscosité à base de silicone sont généralement utilisés pour contrôler l'étalonnage des viscosimètres/rhéomètres Brookfield et sont moins sensibles à la température que les huiles minérales. Ces fluides silicones à usage général sont les standards les plus couramment utilisés à cette fin. Les étalons à base de silicone sont des fluides newtoniens avec une précision de ±1 % de la valeur de viscosité. Ils offrent une excellente stabilité thermique et sont moins sensibles à la température que les étalons à base d'huile pour la viscosité.
Les étalons de viscosité Brookfield sont certifiés selon des méthodes traçables par le National Institute of Standards and Technology (NIST) américain. La sélection d'un ou deux fluides offre généralement suffisamment de points de mesure pour vérifier l'étalonnage de votre instrument. Tous les fluides sont livrés dans des conteneurs d'un demi-litre (1 pinte), accompagnés d'un certificat d'étalonnage.
CARACTÉRISTIQUES ET AVANTAGES
- Précision : ±1 % de la valeur de viscosité
- Excellente stabilité thermique
- Recommandé pour une utilisation avec Brookfield et la plupart des autres viscosimètres rotatifs
- Très économique
- Des valeurs de viscosité et des étalonnages de température spéciaux sont disponibles sur demande
Silicone viscosity Standard fluids are most commonly used to verify the calibration of Brookfield lab viscometers and rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying the calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids, which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations are available upon request
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers and rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
For use with the IgG Purity/Heterogeneity and SDS MW Kits.
10 kDa internal standard is used as a mobility marker and all protein mobility is calculated relative to this internal standard.
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
This round bottom tube is designed for use in Beckman Coulter instruments and rotors. Ultra-Clear tubes are transparent, allowing for easy location of visibly banded or pelleted samples.
Compatible Ultracentrifuge Swinging Bucket Rotor: SW 41 Ti
Certified-free and sterile tubes are also available.
Superior labware is only the beginning when it comes to obtaining extraordinary results in the lab.
Safe, efficient workflows are as critical to your work as quality samples.
Now you can safely harvest high-quality samples in fewer steps from prep to cleanup with Beckman Coulter’s HARVESTLINE sterile bottle liners.
Click here for non-sterile.
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Agitateurs et shakers
Agrégation plaquettaire
Analyse cellulaire
Analyse de l'humidité
Analyse urinaire
Caractérisation des particules
Centrifugation
Chauffage et refroidissement
Chimie analytique
Chimie clinique
Chromatographie flash & préparative
Contrôle environnemental
Contrôles de qualité cliniques
Couleur-Apparence et tests physiques
Culture cellulaire et fermentation
Cytométrie en flux
Désinfection
Electrophorèse capillaire
Enceintes de Protection
Essais et caractérisation des matériaux
Fécondation in vitro (FIV)
Hématologie
Imagerie biologique
Immuno-hématologie
Immunoassay
Lyophilisation
Microbiologie (clinique)
Microscopie
Mobilier de laboratoire et études de conception
Métrologie
Nephelometry (Néphélométrie)
Nettoyage Lavage
POCT
Pesage
Pipetage de liquides (manuel)
Pompes
Préparation d'échantillon
Purification de l'eau
Rhéomètres
Robot de pipetage
Solutions d'automatisation clinique (TLA)
Solutions informatiques cliniques
Spectromètres de masse
Stockage
Stérilisation
Synthèse
Tests sur tablettes
Texturomètres
Toxicologie
Tri cellulaire par Cytométrie en flux
Viscosimètres
Électrochimie