De kleefmat van LABWIT is verkrijgbaar in afzonderlijke stukken (20 x 20 cm) voor het aanpassen van bestaande trays.
Dezelfde kleefmat kan op meerdere plaatsen worden gebruikt. Ze is geschikt voor gebruik op alle metalen oppervlakken en kan worden aangebracht op universele trays met gaten voor reageerbuisjes
Deze Labwit-mat is gebruiksvriendelijk, maakt uw platform veelzijdiger en stelt u in staat om uw shakerbelasting moeiteloos aan te passen.
Eenvoudig te plaatsen en schoon te maken:
gewoon de kleefmat lostrekken en kort in water leggen om te herstellen. Het materiaal keert dan terug naar zijn oorspronkelijke vorm en kan opnieuw worden gebruikt.
Bag contains 500 sample vials for use with the Vi-CELL BLU Analyzer. Minimum volume required in sample vial is 200µm. In FAST mode, a minimum volume of 170µm is required in the sample vial.
Note : This product replace previous reference BEC-C24843 Sample Vials (350 vials each bags)
Thickwall Polypropylene Tubes
For use in Ultracentrifuge Rotors:
- TLA-120.2 (Part Numbers 362046, 357656)
- MLA-150 (Part Numbers 393489, 393490)
Viscositeitsstandaarden op basis van siliconen worden meestal gebruikt om de ijking van Brookfield-viscositeitsmeters/reometers te controleren en zijn minder temperatuurgevoelig dan minerale oliën. Deze siliconenvloeistoffen voor algemeen gebruik zijn de meest gebruikte standaard hiervoor. Siliconenstandaarden zijn Newtoniaanse vloeistoffen met een nauwkeurigheid van ±1% van de viscositeitswaarde. Ze bieden een uitstekende temperatuurstabiliteit en zijn minder temperatuurgevoelig dan oliestandaarden voor viscositeit.
Brookfield-viscositeitsstandaarden zijn gecertificeerd volgens methoden die herleidbaar zijn tot het Amerikaanse National Institute of Standards and Technology (NIST).
De selectie van één of twee vloeistoffen biedt normaal gesproken voldoende meetpunten om de ijking van uw instrument te controleren.
Alle vloeistoffen worden geleverd in containers van ½ liter (1 pint), compleet met een ijkcertificaat.
KENMERKEN & VOORDELEN
- Nauwkeurigheid: ±1% van de viscositeitswaarde
- Uitstekende temperatuurstabiliteit
- Aanbevolen voor gebruik met Brookfield en de meeste andere rotatieviscometers
- Zeer voordelig
- Speciale viscositeitswaarden en temperatuurijkingen zijn op aanvraag verkrijgbaar
Silicone viscosity Standard fluids are most commonly used to verify the calibration of Brookfield lab viscometers and rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying the calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids, which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations are available upon request
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers and rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
For use with the IgG Purity/Heterogeneity and SDS MW Kits.
10 kDa internal standard is used as a mobility marker and all protein mobility is calculated relative to this internal standard.
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify the calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
This round bottom tube is designed for use in Beckman Coulter instruments and rotors. Ultra-Clear tubes are transparent, allowing for easy location of visibly banded or pelleted samples.
Compatible Ultracentrifuge Swinging Bucket Rotor: SW 41 Ti
Certified-free and sterile tubes are also available.
Superior labware is only the beginning when it comes to obtaining extraordinary results in the lab.
Safe, efficient workflows are as critical to your work as quality samples.
Now you can safely harvest high-quality samples in fewer steps from prep to cleanup with Beckman Coulter’s HARVESTLINE sterile bottle liners.
Click here for non-sterile.
Silicone viscosity standard fluids are most commonly used to verify calibration of Brookfield lab viscometers/ rheometers and are less temperature sensitive than mineral oils.
General purpose silicone fluids are the most commonly used standard for verifying calibration of your Brookfield Viscometer/Rheometer.
Silicone Standards are Newtonian fluids which are accurate to ±1% of viscosity value.
Silicone fluids provide excellent temperature stability and are less temperature sensitive than oil viscosity standards.
Brookfield Viscosity Standards are certified by methods traceable to the United States National Institute of Standards and Technology (NIST).
The selection of one or two fluids will normally provide sufficient measurement points to verify calibration of your instrument.
All fluids are supplied in ½ liter (1 pint) containers complete with a certificate of calibration.
FEATURES & BENEFITS
- Accuracy: ±1% of viscosity value
- Excellent temperature stability
- Recommended for use with Brookfield and most other rotational viscometers
- Most economical
- Special viscosity values and temperature calibrations available upon request
Beschermingskasten
Biologische beeldvorming
Bloedplaatjesaggregatie
Capillaire elektroforese
Celculturen en fermentatie
Cellulaire analyse
Centrifugatie
Chromatografie (flash & prep)
DNA / RNA (nucleïnezuren)
Deeltjeskarakterisatie
Desinfectie
Elektrochemie
Flowcytometrie
Flowcytometrie celsorting
Geautomatiseerde Liquid Handling
Hematologie
Immuno-hematologie
Immunodosage
In-vitrofertilisatie (IVF)
Kleur-Appearance en fysische testen
Klinische IT-oplossingen
Klinische automatisering (TLA)
Klinische chemie
Klinische kwaliteitscontroles
Laboratoriummeubilair & ontwerpstudies
Massaspectrometers
Materiaaltesten en -karakterisering
Metrologie
Microbiologie (Klinische)
Microscopie
Monstersvoorbereiding
Nefelometrie
Omgevingscontrole
Opslag
POCT
Pipetteren van vloeistoffen (handmatig)
Pompen
Reinigen
Reometers
Shakers and stirrers
Sterilisatie
Synthese
Tablet testing
Texturometers
Toxicologie
Urineanalyse
Verwarmen & koelen
Viscometers
Vochtanalyse
Vriesdrogen
Waterzuivering
Wegen