Qu'est-ce qu'un stérilisateur à air chaud ?
In dry sterilization, hot air - with no water vapor or moisture - ensures that laboratory equipment and devices are sterile without having to use risky decontamination methods.
Chaque stérilisateur à air chaud S de Memmert est classé comme dispositif médical de classe IIb. Memmert met en circulation des dispositifs médicaux de classe IIb conformément à la directive 93/42/CEE jusqu'au 26 mai 2024, conformément aux dispositions transitoires de l'article 120 (2) de la directive (UE) 2017/745.
D'un point de vue technologique, un stérilisateur à air chaud est la même chose qu'un stérilisateur à eau chaude. four de laboratoiremais il est certifié en tant que dispositif médical de classe IIb.
Nos produits
Hot air steriliser SF30, forced air circulation, with SingleDISPLAY, 32 l, working-temperature range at least 10 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 1 grid, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps and adjustable fan speed from 0 % to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 585 x 704 x 434 mm; stainless steel interior: 400 x 320 x 250 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 1600 W
Hot air steriliser SN30, natural convection, with SingleDISPLAY, 32 l, working-temperature range at least 5 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 1 grid, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 585 x 704 x 434 mm; stainless steel interior: 400 x 320 x 250 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 1600 W
Hot air steriliser SF55, forced air circulation, with SingleDISPLAY, 53 l, working-temperature range at least 10 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 1 grid, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps and adjustable fan speed from 0 % to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 585 x 784 x 514 mm; stainless steel interior: 400 x 400 x 330 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 2000 W
Hot air steriliser SN55, natural convection, with SingleDISPLAY, 53 l, working-temperature range at least 5 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 1 grid, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 585 x 784 x 514 mm; stainless steel interior: 400 x 400 x 330 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 2000 W
Hot air steriliser SF75, forced air circulation, with SingleDISPLAY, 74 l, working-temperature range at least 10 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 2 grids, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps and adjustable fan speed from 0 % to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 585 x 944 x 514 mm; stainless steel interior: 400 x 560 x 330 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 2500 W
Hot air steriliser SN75, natural convection, with SingleDISPLAY, 74 l, working-temperature range at least 5 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 2 grids, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 585 x 944 x 514 mm; stainless steel interior: 400 x 560 x 330 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 2500 W
Stérilisateur à air chaud SF110, 108 l, 20-250 °C Référence : MEM-SF110 Stérilisateur à air chaud SF110 avec circulation d'air forcée et SingleDISPLAY, 108 l. Plage de température de fonctionnement minimale 10 °C au-dessus de la température ambiante jusqu'à +250 °C, plage de température réglable +20 °C à +250 °C. Équipé de 2 grilles et d'une porte en acier inoxydable. Le clapet d'air est réglable électroniquement de 0 à 100 % par paliers de 10 % et la vitesse du ventilateur de 0 % à 100 % par paliers de 10 %. Interface Ethernet pour la lecture du journal des protocoles, double protection contre la surchauffe, enregistreur de données interne avec une capacité de stockage d'au moins 10 ans, fonction d'étalonnage. Certificat d'étalonnage d'usine à +160 °C. Extérieur en acier inoxydable structuré : 745 x 864 x 584 mm ; intérieur en acier inoxydable : 560 x 480 x 400 mm. Tension : 230 V, 50/60 Hz ; puissance électrique max. : env. 2800 W.
Hot air steriliser SN110, natural convection, with SingleDISPLAY, 108 l, working-temperature range at least 5 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 2 grids, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 745 x 864 x 584 mm; stainless steel interior: 560 x 480 x 400 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 2800 W
Hot air steriliser SF160, forced air circulation, with SingleDISPLAY, 161 l, working-temperature range at least 10 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 2 grids, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps and adjustable fan speed from 0 % to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 745 x 1104 x 584 mm; stainless steel interior: 560 x 720 x 400 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 3200 W
Hot air steriliser SN160, natural convection, with SingleDISPLAY, 161 l, working-temperature range at least 5 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 2 grids, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 745 x 1104 x 584 mm; stainless steel interior: 560 x 720 x 400 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 3200 W
Hot air steriliser SF260, forced air circulation, with SingleDISPLAY, 256 l, working-temperature range at least 10 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 2 grids, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps and adjustable fan speed from 0 % to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 824 x 1183 x 684 mm; stainless steel interior: 640 x 800 x 500 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 3400 W
Hot air steriliser SN260, natural convection, with SingleDISPLAY, 256 l, working-temperature range at least 5 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 2 grids, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 824 x 1183 x 684 mm; stainless steel interior: 640 x 800 x 500 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 3400 W
