Wat is een heteluchtsterilisator?
Bij droge sterilisatie steriliseert hete lucht — zonder waterdamp of vocht — laboratoriumapparatuur en -instrumenten zonder risicovolle decontaminatiemethoden.
Elke Memmert heteluchtsterilisator uit de S-reeks is geclassificeerd als een medisch hulpmiddel klasse IIb.
Memmert brengt medische hulpmiddelen van klasse IIb op de markt conform MDD 93/42/EEG tot 26 mei 2024, op grond van de overgangsbepalingen van Verordening (EU) 2017/745, artikel 120(2).
Technisch gezien is een heteluchtsterilisator identiek aan een laboratoriumoven , maar hij beschikt over de certificering als medisch hulpmiddel klasse IIb.
Onze producten
Hot air steriliser SF30, forced air circulation, with SingleDISPLAY, 32 l, working-temperature range at least 10 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 1 grid, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps and adjustable fan speed from 0 % to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 585 x 704 x 434 mm; stainless steel interior: 400 x 320 x 250 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 1600 W
Hot air steriliser SN30, natural convection, with SingleDISPLAY, 32 l, working-temperature range at least 5 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 1 grid, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 585 x 704 x 434 mm; stainless steel interior: 400 x 320 x 250 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 1600 W
Hot air steriliser SF55, forced air circulation, with SingleDISPLAY, 53 l, working-temperature range at least 10 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 1 grid, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps and adjustable fan speed from 0 % to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 585 x 784 x 514 mm; stainless steel interior: 400 x 400 x 330 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 2000 W
Hot air steriliser SN55, natural convection, with SingleDISPLAY, 53 l, working-temperature range at least 5 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 1 grid, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 585 x 784 x 514 mm; stainless steel interior: 400 x 400 x 330 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 2000 W
Hot air steriliser SF75, forced air circulation, with SingleDISPLAY, 74 l, working-temperature range at least 10 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 2 grids, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps and adjustable fan speed from 0 % to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 585 x 944 x 514 mm; stainless steel interior: 400 x 560 x 330 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 2500 W
Hot air steriliser SN75, natural convection, with SingleDISPLAY, 74 l, working-temperature range at least 5 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 2 grids, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 585 x 944 x 514 mm; stainless steel interior: 400 x 560 x 330 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 2500 W
Heteluchtsterilisator SF110 met geforceerde luchtcirculatie en SingleDISPLAY, 108 l. Werktemperatuurbereik minimaal 10 °C boven omgevingstemperatuur tot +250 °C, insteltemperatuurbereik +20 °C tot +250 °C. Voorzien van 2 roosters en roestvrijstalen deur. De luchtklep is elektronisch instelbaar van 0 tot 100 % in stappen van 10 % en de ventilatorsnelheid van 0 % tot 100 % in stappen van 10 %. Ethernet-interface voor het uitlezen van het protocol-logboek, dubbele overtemperatuurbeveiliging, interne datalogger met een opslagcapaciteit van minimaal 10 jaar, ijkingsfunctie. IJkcertificaat van de fabriek bij +160 °C. Buitenkant van gestructureerd roestvrij staal: 745 x 864 x 584 mm; binnenkant van roestvrij staal: 560 x 480 x 400 mm. Spanning: 230 V, 50/60 Hz; max. elektrisch vermogen: ca. 2800 W.
Hot air steriliser SN110, natural convection, with SingleDISPLAY, 108 l, working-temperature range at least 5 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 2 grids, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 745 x 864 x 584 mm; stainless steel interior: 560 x 480 x 400 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 2800 W
Hot air steriliser SF160, forced air circulation, with SingleDISPLAY, 161 l, working-temperature range at least 10 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 2 grids, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps and adjustable fan speed from 0 % to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 745 x 1104 x 584 mm; stainless steel interior: 560 x 720 x 400 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 3200 W
Hot air steriliser SN160, natural convection, with SingleDISPLAY, 161 l, working-temperature range at least 5 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 2 grids, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 745 x 1104 x 584 mm; stainless steel interior: 560 x 720 x 400 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 3200 W
Hot air steriliser SF260, forced air circulation, with SingleDISPLAY, 256 l, working-temperature range at least 10 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 2 grids, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps and adjustable fan speed from 0 % to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 824 x 1183 x 684 mm; stainless steel interior: 640 x 800 x 500 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 3400 W
Hot air steriliser SN260, natural convection, with SingleDISPLAY, 256 l, working-temperature range at least 5 °C above ambient temperature to +250 °C, setting temperature range +20 °C to +250 °C, with 2 grids, stainless steel door, electronically adjustable air flap from 0 to 100 % in 10 % steps, Ethernet interface for reading out protocol log, double overtemperature protection, internal data logger with storage capacity of at least 10 years, calibration facility; works calibration certificate at +160 °C; textured stainless steel exterior: 824 x 1183 x 684 mm; stainless steel interior: 640 x 800 x 500 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 3400 W
