MEMMERT

CO2 Incubator ICO150med, 156l, 18-50°C, CO2 control 0-20%

Reference: MEM-ICO150med

https://www.analis.com/web/image/product.template/5039/image_1920?unique=cfde648

CO2 Incubator ICO150med, 
Safety at all times: High-end functions for the protection of cell cultures, bacteria cultures or tissue cultures.

TwinDISPLAY, 156 l, working-temperature range 5 °C above ambient temperature to 50 °C, setting range 18 °C to 50 °C, with CO2 control - with dual beam NDIR system - adjustable from 0 % - 20 %, humidity limitation by a Peltier element, when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2,5 %, electronic microprocessor temperature controller with Pt100 and auto-diagnostic system, fully insolated stainless steel door and heated inner glass door, all-round heating on 6 sides, stainless steel housing and interior; with 1 water dish, with 2 stainless steel shelves; multiple overtemperature protection/under temperature alarm, standard sterilisation programme; works calibration certificate at +37 °C, 5 % CO2; textured stainless steel exterior: 719 x 1070 x 591 mm; stainless steel interior: 560 x 700 x 400 mm; voltage: 230 V, 50/60 Hz; max. electrical load: approx. 2000 W

    This combination does not exist.

    Technical information

    Temperature

    Working-temperature range5 °C above ambient temperature up to +50 °C
    Standard sterilisation programme: 60 minutes at 180°C (without removing the sensors)
    Setting temperature range+18 to +50 °C
    Setting accuracy temperature0.1 °C
    Temperature sensor2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
    Temperature variation in chamberat + 37 °C +/- 0.3 K
    Temperature fluctuations with timeat 37 °C +/- 0.1 K

    Humidity

    Humidity control (standard)Humidity limitation thanks to a Peltier element; when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 %
    Setting accuracy humidity0.5 % rh
    Setting range active humidity control (with option K7)40 to 97 % rh and rh-Off

    Control of standard components

    CO2 controlDigital electronic CO2 control with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation
    Adjustment range CO20 to 20 % CO2
    Setting accuracy CO20,1%
    Variation in time CO2+/- 0.2 % CO2
    Adjustment range O21 to 20 % O2
    Setting accuracy O20.1 % O2

    Control technology

    ControlCOCKPITTwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
    Language settingGerman, English, Spanish, French, Polish, Czech, Hungarian
    Function SetpointWAITthe process time does not start until the set temperature is reached
    Adjustable parameterstemperature (Celsius or Fahrenheit), CO2, programme time, time zones, summertime/wintertime

    Communication

    InterfaceEthernet LAN, USB
    Documentationprogramme stored in case of power failure
    ProgrammingAtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port

    Safety

    AutoSAFETYadditionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating function is switched off in case of overtemperature, cooling function in case of undertemperature
    Autodiagnostic systemintegral fault diagnostics for temperature and CO2
    Alarmvisual and acoustic

    Heating concept

    6 sideslarge-area multi-function heating system on four sides with additional door and back heating to avoid condensation

    Standard equipment

    Works calibation certificateWorks calibration certificate at +37 °C, 5 % CO2 and 90 % rh (requires option K7); standard equipment for units with active humidity control
    Works calibation certificateWorks calibration certificate at +37 °C, 5 % CO2, 90 % rh and 10 % O2 (requires option K7 and option T6); standard equipment for units with O2 control
    Works calibation certificateincl. works calibration certificate (measuring point chamber centre) at +37°C, 5 % CO2 for standard units
    Doorfully insulated stainless steel door with 2-point locking (compression door lock)
    Doorinner glass door with opening (8 mm Ø) to take gas sample
    Standard equipmentCO2 connection set: hose with coupling and clamp
    Standard accessoriesMembrane filter (in order to remove impurities and pollutants, all incoming gases pass through a membrane filter before they reach the chamber)
    Internals2 perforated stainless steel shelf/shelves
    Internals1 stainless steel water dish

    Stainless steel interior

    Dimensionsw(A) x h(B) x d(C): 560 x 700 x 400 mm (d less 35 mm for fan)
    Interiormaterial 1.4301 (ASTM 304), corrosion resistant
    Volume156 l
    Max. number of internals10
    Max. loading of chamber120 kg
    Max. loading per internal15 kg

    Textured stainless steel casing

    Dimensionsw(D) x h(E) x d(F): 719 x 1070 x 591 mm (d +56mm door handle)
    Housingrear zinc-plated steel

    Electrical data

    Voltage Electrical load230 V, 50/60 Hz
    approx. 1500 W
    Voltage Electrical load115 V, 50/60 Hz
    approx. 1500 W

    Ambient conditions

    Set UpThe distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
    Ambient temperature10 °C to 35 °C
    Humidity rhmax. 70 %, non-condensing
    Altitude of installationmax. 2,000 m above sea level
    Overvoltage categoryII
    Pollution degree2

    Packing/shipping data

    Transport informationThe appliances must be transported upright
    Customs tariff number8419 8998
    Country of originFederal Republic of Germany
    WEEE-Reg.-No.DE 66812464
    Dimensions approx incl. cartonw x h x d: 800 x 1250 x 800 mm
    Net weightapprox. 90 kg
    Gross weight carton