ESCO LIFE SCIENCES

MIRI II Incubator, 12 chambers, with SAFESens for pH monitoring, 230V, 50/60 Hz

Reference: ESC-2070166

The MIRI® II Multiroom Incubator dedicates one chamber for one patient. IVF lab can choose from models having 6 or 12 chambers that are completely independent of each other. Any disruption on one chamber (e.g. temperature drop after opening the lid) has zero impact on the rest of the system. It has a touchscreen PC to control and monitor important parameters (temperature, gas concentration) simultaneously and give visual and audible alarm to signal critical conditions.

FEATURES:
1. One Chamber - One Patient
2. Superior gas system
3. Heated lid
4. Fast temperature and gas recovery
5. Touchscreen PC
6. Optimized heating plates
7. Easy external validation
8. Full-featured data logging software

SAFE Sens pH monitoring system for IVF culture media is integrated as a standard feature. In the US, every MIRI® II-12 unit will come equipped to easily turn on the pH monitoring feature. The SAFE Sens provides the following benefits over conventional pH tools:
(a) a decrease in time spent on pH protocols,
(b) data trending to optimize media pH equilibration time,
(c) having out-of-range email alert system, and
(d) being non-invasive due to the non-usage of petri dish and the constant opening of the incubator.

Request more information

MIRI II Incubator, 12 chambers, with SAFESens for pH monitoring, 230V, 50/60 Hz

Technical information

MIRI® II Incubator capacity: 12 Chambers
Overall Dimensions (W x D x H): 739 x 560 x 194 mm
Net Weight: 45 kg
Material: Mild steel / Aluminum / POM / Stainless steel
Power Supply: 230V 50/60 Hz
Power Consumption: 530 W
Temperature Control Range: 25 - 40° C
CO2 Gas Consumption: <2 L/h
N2 Gas Consumption: <6 L/h
CO2 Control Range: 3 - 9.9%
O2 Control Range: 5 - 20%
CO2 Input Gas Pressure: 0.6 bar (8.70 psi)
N2 Input Gas Pressure: 0.6 bar (8.70 psi)
Shipping weight: 60 kg
Shipping dimension: 880 x 700 x 355 mm

Related accessories, consumables & products

ESCO LIFE SCIENCES

MRA-1007 VOC/HEPA filter for miri-6A10 or miri TL

Reference : ESC-1320011

High-efficiency particulate air (HEPA) filters remove particles smaller than 0.3 µm. Filters to remove volatile organic compounds (VOC – large group of carbon-based chemicals that easily evaporate at room temperature), which could potentially jeopardize embryo culture procedures. It has been known that the air quality in IVF laboratory can have higher levels of VOCs than outdoor environments air. The impact of VOC on embryo culture will significantly affect on embryo cleavage rate, embryo development and blastocyst formation rate.

ESCO HEPA filter with efficiency of 99.99% at 0.3 microns.
ESCO VOC filter to remove any compounds that are harmful to embryo development.

To be replaced every 3 months

Accessory for:
-MRI-6A10
-MRI-TL