Systec DX-150

Reference: SYS-2150

The Systec D-Series are front-loading, bench-top autoclaves available in 7 sizes with chamber capacities ranging from 23 to 200 l. Compact on the outside but with ideal chamber capacities inside. Each size has an optimal loading capacity for most standard media bottles and Erlenmeyer flasks.

• Fully automatic, microprocessor control including 12 programs:
1-3     Solids
4-5     Waste destruction bags
6-7     Liquid waste
8-11   Liquid Media
12 Cleaning
• Integrated separate steam generator (no heating elements in sterilization chamber)
• Novel safety ring-lock closure system with lip seal
• Temperature and steam pressure up to 140°C / 4 bar absolute pressure, extendable to 150°C / 5 bar absolute pressure
• Thermal lock: door lock controlled by pressure and medium temperature according to Pressure Vessel Regulations
• Flexible PT-100 temperature sensor for reference vessel
• Medium temperature-controlled sterilization time
• Electronic pressure transducer for pressure and temperature control
• "Autofill" - Automatic demineralized water feed for steam generation
• Special program for waste destruction with pulsating heat-up period for improved ventilation of waste bags
• Start by clock / timer for programmed start time
• Steam exhaust condensation, water cooled, thermostatic controlled
• Common collector connection for all outlets
• Emptying valve
• Base plate for vessels, baskets etc.
• Validation port
• RS 232 interface for external data transfer
• Prepared for subsequent printer installation
• Prepared for subsequent rapid cooling installation
• Prepared for subsequent installation of vacuum system
• Prepared for subsequent drying installation
• Safety cut of at low water level
• Safety cut of at excess temperature

    This combination does not exist.

    Technical information

    DX-150 model specifications:
    Chamber dimensions Ø x depth (mm): 500 x 750
    Chamber volume in liters total / nominal:  162 / 150

    Electrical connections: 380 - 400 V 3 phase (CEE socket 16 A)
    (220 Volt or other voltage and single phase 
    operation on request available)
    Demineralized water: 3/4" stopcock for tube connection 
    Process water (tap water): 3/4" stopcock for tube connection 
    (for exhaust vapor condensation; apparatus can also
    be operated without this)
    Drain: 3/4" tube connection; max. 400 mm from floor or floor drain (siphon).

    Related documents




    Autoclaves - 2150_en.pdf
    08 / 12 / 2023