Latest Lab Partnerships & Innovations in Benelux | Analis News

9 Articles

Clinical centrifuges × Liquid Handling (Manual) × Material testing × Metrology × Case Studies ×

The new Benchtop Centrifuges Sigma 3 Series

SIGMA NEW SERIES 3: All-rounder for 1.6 litres with touch control The new Sigma 3-16T and Sigma 3-17KT are benchtop centrifuges are based on the requirements of modern laboratories. Both models featur...

Benchtop centrifuges Clinical centrifuges

Continue reading

First Fusion Absolute in the Netherlands Installed by Analis, Official Vilber Distributor in the Benelux

Supporting Cutting-Edge Osteoarthritis Research This state-of-the-art system was delivered to Maastricht University , where it will be used by Prof. Dr. Tim Welting and his team at the Department of O...

Case Studies Chemiluminescence & fluorescence imagers Imaging

Continue reading

Freeze Drying in ISO Laboratories: JRC Geel Customer Experience

Hear from our customer, JRC Geel, a Martin Christ partner since 1985, as they share their experience with the E2-65D Pilot Freeze Dryer featuring Air-CO2 Cooling This is what the JRC laboratory explai...

Case Studies Freeze dryers pilot Freeze drying

Continue reading

How can one optimize a lyophilization process for oligonucleotides and APIs while adhering to GMP standards?

How can one optimize a lyophilization process for oligonucleotides and APIs while adhering to GMP standards? Why choose lyophilization? Why in a cleanroom and under laminar flow? This is what the Eur...

Case Studies Freeze dryers pilot Freeze drying

Continue reading

The METRIOS 332 by VICIVISION is here and you can be the first to test it

The METRIOS 332 is soon available in our Analis Metrology Lab An ultra-high magnification sensor detects points in X-Y-Z even on the smallest details. The METRIOS by VICIVISION - Optical Measuring Mac...

Metrology

Continue reading

New Shining 3D Partnership to Offer New Metrology 3D Laser Scanning Solutions

We are pleased to announce our new partnership with SHINING 3D to offer New Metrology 3D Laser Scanning Solutions For over 20 years, the company has focused on R&D and manufacturing of high-precision ...

Metrology

Continue reading

NEW PARTNERSHIP ANALIS & UniPix ATMOS

We are proud to announce our new partnership with UNIPIX to provide new solutions for pipette verification Looking for solution to enhance your pipette accuracy and ensure data integrity for full conf...

Liquid Handling (Manual) Pipette calibration

Continue reading

Analis is thrilled to unveil our latest partnership with VELP Scientifica

VELP Scientifica is an esteemed Italian company renowned for designing and manufacturing state-of-the-art laboratory equipment and analytical instruments. Since its founding in 1983, V ELP has been at...

Analytical chemistry Material testing Sample preparation

Continue reading

𝗧𝗿𝗶𝗺𝗼𝘀 𝗩𝟰+ 𝗛𝗲𝗶𝗴𝗵𝘁 𝗚𝗮𝘂𝗴𝗲

We’re excited to introduce the all-new 𝗧𝗿𝗶𝗺𝗼𝘀 𝗩𝟰+ 𝗛𝗲𝗶𝗴𝗵𝘁𝗚𝗮𝘂𝗴𝗲 ! New standard in height gauge performance for ultra-precise vertical-measurement. Designed with workshops in mind, it’s the perfect cost-...

1D & 2D Height gauges Metrology

Continue reading