Latest Lab Partnerships & Innovations in Benelux | Analis News

10 Articles

Biosafety cabinets × Metrology × Particle characterization × Pipette calibration × Case Studies ×

Optimisation of the detection of urinary crystals on the FUS3000plus through collaboration between CHU Liège, Analis & Dirui

Towards a new generation of urinary sediment analysis: optimising the detection of urinary crystals on the FUS3000plus platform through collaboration between Liège University Hospital, Analis and Diru...

Case Studies

Continue reading

First Fusion Absolute in the Netherlands Installed by Analis, Official Vilber Distributor in the Benelux

Supporting Cutting-Edge Osteoarthritis Research This state-of-the-art system was delivered to Maastricht University , where it will be used by Prof. Dr. Tim Welting and his team at the Department of O...

Case Studies Chemiluminescence & fluorescence imagers Imaging

Continue reading

Freeze Drying in ISO Laboratories: JRC Geel Customer Experience

Hear from our customer, JRC Geel, a Martin Christ partner since 1985, as they share their experience with the E2-65D Pilot Freeze Dryer featuring Air-CO2 Cooling This is what the JRC laboratory explai...

Case Studies Freeze dryers pilot Freeze drying

Continue reading

How can one optimize a lyophilization process for oligonucleotides and APIs while adhering to GMP standards?

How can one optimize a lyophilization process for oligonucleotides and APIs while adhering to GMP standards? Why choose lyophilization? Why in a cleanroom and under laminar flow? This is what the Eur...

Case Studies Freeze dryers pilot Freeze drying

Continue reading

The METRIOS 332 by VICIVISION is here and you can be the first to test it

The METRIOS 332 is soon available in our Analis Metrology Lab An ultra-high magnification sensor detects points in X-Y-Z even on the smallest details. The METRIOS by VICIVISION - Optical Measuring Mac...

Metrology

Continue reading

New Shining 3D Partnership to Offer New Metrology 3D Laser Scanning Solutions

We are pleased to announce our new partnership with SHINING 3D to offer New Metrology 3D Laser Scanning Solutions For over 20 years, the company has focused on R&D and manufacturing of high-precision ...

Metrology

Continue reading

NEW PARTNERSHIP ANALIS & UniPix ATMOS

We are proud to announce our new partnership with UNIPIX to provide new solutions for pipette verification Looking for solution to enhance your pipette accuracy and ensure data integrity for full conf...

Liquid Handling (Manual) Pipette calibration

Continue reading

𝗧𝗿𝗶𝗺𝗼𝘀 𝗩𝟰+ 𝗛𝗲𝗶𝗴𝗵𝘁 𝗚𝗮𝘂𝗴𝗲

We’re excited to introduce the all-new 𝗧𝗿𝗶𝗺𝗼𝘀 𝗩𝟰+ 𝗛𝗲𝗶𝗴𝗵𝘁𝗚𝗮𝘂𝗴𝗲 ! New standard in height gauge performance for ultra-precise vertical-measurement. Designed with workshops in mind, it’s the perfect cost-...

1D & 2D Height gauges Metrology

Continue reading

ESCO Biosafety Cabinet G4 Serie

Prevent cross contamination for protecting your sample... Discover the new : ESCO Labculture® Plus G4 Class II BSC with Centurion Touchscreen Controller ESCO Labuculture® G4 Class II Type A2 BSC with ...

Biosafety cabinets

Continue reading

Working in Particle Characterization & Zeta Potential analysis ?

Experience the BeNano series: The latest generation of nanoparticle size and zeta potential analyzer designed by our supplier Bettersize Instruments. Dynamic light scattering (DLS), electrophoretic ...

Particle characterization

Continue reading